Olive Grove Woodshop

Olive Grove Woodshop We take pride in crafting one-of-a-kind furniture pieces. We begin with rough-sawn lumber that we mill to reveal the wood’s hidden beauty.

We collaborate closely with our customers to design furniture that perfectly suits their needs and unique space.

06/10/2026

Loving This New Crosscut Sled!

After months of using a make shift sled due to moving shops, it’s so nice to have a legit crosscut sled again. And since we were building a new one, we decided to design and build the perfect sled for us. It’s built around the matchfit system which gives it a ton of versatility. Stay tuned for a full video where we go into the details and show off a few cool features we snuck in.

06/04/2026

It Takes A Lot Of Work To Look This Good

A ton of behind the scenes work goes into making book matched panels for doors. Especially if you start from rough sawn lumber like we do with all our furniture. But the end result is worth all that extra effort. Seeing that old growth cherry grain pop when the finish hits never gets old!



.store .us

06/01/2026

How To Fill Knots Fast!

Filling deeper knots, cracks, and other voids typically grinds a project to a halt because of epoxy cure times. But ​⁠this uv filler from cuts what once took hours to a few minutes. The key is to add the filler in small “lifts” (approximately 1/8” deep) to ensure the uv light can fully cure between layers. It dries super clear with no bubbles or other imperfections. Now if you’ve seen any of our videos then you’ll know that we prefer black filler, luckily there’s an easy solution. Keep your final layer of uv filler just below the surface, lightly scuff with sand paper to ensure proper adhesion, and then add black CA glue (we prefer ) to finish the fill.

💥Affiliate Discount Links In Bio💥

05/26/2026

Much Needed Shop Upgrade!

Finally had a chance to use the new portamate pro compact pocket hole jig from to replace our shop’s leaky inefficient roll up door with some solid double doors that can be insulated! Their cast metal body is a serious upgrade to the cheap blue plastic one we’re all used to, and the easy to use gauge system makes screw selection a breeze. Plus the sawdust exhaust port is oddly satisfying 😂

💥Affiliate Discount Links In Bio💥

05/18/2026
05/18/2026

Our episode just dropped on our YouTube channel! Check out how we design and build this convertible changing table dresser out of veneer and curly walnut. Sponsored by .toolworks

💥Affiliate Discount Links In Bio💥

Address

Alachua, FL

Website

Alerts

Be the first to know and let us send you an email when Olive Grove Woodshop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Olive Grove Woodshop:

Shortcuts

Share

Category