Edrington's Floor Covering's

04/23/2026

LVT, Baseboard-1/4 round install, primed to encapsulate substrate.

06/01/2025

24x48” Large Format Polished Porcelain

06/01/2025

A steam shower I was able to salvage. Considering the original install had ZERO waterproofing, anything I could come up with was an improvement. The bathroom floor itself was all torn up too with the concrete poured higher than the finished surface itself and the fl**ge was installed wrong. So after charging this lady over 20k, most of the work had to be redone. She called the right guy, too late.
But ultimately it’s like it never happened.
I picked up a good customer though and she’s got me in her corner now so in the end we both won.

08/17/2024

11/22/2023

300 sq ft Self leveler pour. Then we undercut the fireplace with the jamb saw thats an ordeal.
2nd floor getting the squeeks out took patience and know how. Last guy laid and randomly nailed subfloor on top of the existing subfloor(it was a very loud floor)I guessed where a stud was until I found one, got the laser out measured 18 and fastened all subfloor to the actual joist.
Pro tip to new guys or remodelers: I’ve been setting up my air scrubber on every multiple day job with any kind of demo and leaving it on until the job is done. Keeps the mess down and people seem to really appreciate it.

09/23/2023

A restoration job that we did for our friends over @ Life Church on East Pages. We used some donated carpet tile and integrated a couple of new boxes as well and then went with a random pattern because we had random amounts. So making it random actually took some focus. I thought it turned out pretty cool though.
And in the other room we made 2 rooms into one and capped off all the plumbing. We actually ended up making use of the window that Tiff and I took out of our bathroom when we did our addition.

07/12/2023

A full remodel we just wrapped up yesterday. Its all marble and about as custom as it gets.

It’s seamless AND heated from the door to the infinity drain.
To achieve that I removed a mortar bed and reinstalled a new recessed mortar bed and pan,
installed the heat cable, incapsulated that in self leveler(very carefully), added a layer of Kerdi for waterproofing, then the marble mosaic.

We made all the bullnose from scratch out of the field tile with a ramondi bullnose profiler then polished each piece before installing it.

We sealed the marble with Laticrete enhancer. That stuff brings natural stone to life and protects it.

Some of the last pictures show why waterproofing is important. That entire exterior wall was in pretty desperate shape and not to mention load bearing. I set some temporary beams to assume the weight and reframed the entire thing before setting the window. Then I waterproofed everything so no one has to repeat these steps again or die from black mold exposure.

01/27/2023

6” Gluedown Engineered