Indiana Wall Systems

06/05/2026

𝗠𝗼𝘀𝘁 𝗣𝗿𝗼𝗽𝗲𝗿𝘁𝘆 𝗠𝗮𝗻𝗮𝗴𝗲𝗿𝘀 𝗗𝗼𝗻'𝘁 𝗛𝗮𝘃𝗲 𝗔𝗻 𝗘𝗜𝗙𝗦 𝗣𝗿𝗼𝗯𝗹𝗲𝗺. 𝗧𝗵𝗲𝘆 𝗛𝗮𝘃𝗲 𝗔 𝗖𝗼𝗼𝗿𝗱𝗶𝗻𝗮𝘁𝗶𝗼𝗻 𝗣𝗿𝗼𝗯𝗹𝗲𝗺.

You manage several buildings. One has staining under a parapet. Another has caulk pulling away from storefront windows. A third has a soft spot near a scupper.

Each one wants a slightly different trade, a slightly different scope, and a separate quote. Line up the EIFS work, the caulking, the paint, the trim, and the gutter work, and suddenly you are riding herd on five vendors and five invoices for what should have been one job.

𝘛ℎ𝘢𝘵 𝘤𝘰𝘰𝘳𝘥𝘪𝘯𝘢𝘵𝘪𝘰𝘯 𝘪𝘴 𝘸ℎ𝘦𝘳𝘦 𝘵ℎ𝘦 𝘣𝘶𝘥𝘨𝘦𝘵 𝘲𝘶𝘪𝘦𝘵𝘭𝘺 𝘭𝘦𝘢𝘬𝘴.

Here is the pattern we see most. A small repair lands with a large contractor whose overhead was built for large projects. That overhead does not shrink for a minor fix. The firm ends up paying two or three times what the work should cost, mostly because there were never many EIFS-literate contractors to call.

Indiana Wall Systems is built the other way. Property management repair is the bulk of what we do, so we scope the work to what the wall actually needs.

Across a portfolio, that math compounds. Pay two or three times over on a handful of small repairs each quarter and the line item stops looking small. The answer is not a cheaper crew cutting corners. It is a contractor who right-sizes the scope, so you are paying for the repair the wall needs and nothing you were talked into.

We will not re-face an entire elevation if a targeted repair gives you a presentable wall. We inspect first, then recommend the most cost-effective scope, with deducts where they apply.

A property walk with us is specific. We read each elevation the way water moves across it: terminations near the base, the transitions where EIFS meets windows, doors, and other claddings, sealant joints that have gone hard or pulled loose, kickout and step flashing at roof-to-wall intersections, and the low spots around scuppers and downspouts where staining tends to show up first.

The location and pattern of what we find is what tells us whether you are looking at a sealant refresh, a flashing correction, or a section that has to come back to the substrate.

Most property management clients are not calling about a single wall. They have a steady run of repairs across a portfolio and want one number to call and one contractor who already knows their buildings. We are set up for exactly that. We can phase work across an elevation, a building, or a full site, keep the documentation consistent, and bill it in a way that fits how your repair budget is tracked.

One package can carry the EIFS repair, caulking, paint, trim, gutter and scupper work, power washing, even post-lease signage removal, submitted on a single invoice across several levels of repair.

We also work the way occupied buildings demand. We keep a clean site, plan around blocked unit access, and take the extra safety steps a functioning public area calls for, so tenants and customers are not disturbed.

On malls, shopping centers, and large retail around Indianapolis, we inspect, estimate, and submit pricing the next day, every time.

Jeff Johnson has worked with EIFS since 1989 and has contracted in Indiana since 2000, which is 26 years on these wall systems. Indiana Wall Systems holds Master Builders, Senergy, and EIFS Installers certifications, carries an A+ BBB rating, and backs the work with a 10-year transferable warranty plus follow-up inspections at 30 days, 1 year, 3 years, and 10 years.

If you are tired of chasing subcontractors and second-guessing scope, that is the exact problem this page is built to fix. Send over the addresses and the trouble spots you already know about, and we will start with a walk.

𝘞𝘢𝘭𝘬 𝘺𝘰𝘶𝘳 𝘱𝘳𝘰𝘱𝘦𝘳𝘵𝘪𝘦𝘴 𝘸𝘪𝘵ℎ 𝘢 𝘤𝘰𝘯𝘵𝘳𝘢𝘤𝘵𝘰𝘳 𝘸ℎ𝘰 𝘴𝘤𝘰𝘱𝘦𝘴 𝘵ℎ𝘦 𝘳𝘦𝘱𝘢𝘪𝘳 𝘣𝘦𝘧𝘰𝘳𝘦 𝘲𝘶𝘰𝘵𝘪𝘯𝘨 𝘪𝘵. 𝘊𝘢𝘭𝘭 (𝟳𝟲𝟱) 𝟯𝟰𝟭-𝟲𝟬𝟮𝟬
https://centralindianastuccorepair.com/property-managers/

06/04/2026

𝗧𝗵𝗲 𝗺𝗼𝘀𝘁 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗹𝗮𝘆𝗲𝗿 𝗼𝗳 𝘆𝗼𝘂𝗿 𝗘𝗜𝗙𝗦 𝘄𝗮𝗹𝗹 𝗶𝘀 𝗼𝗻𝗲 𝘆𝗼𝘂 𝘄𝗶𝗹𝗹 𝗻𝗲𝘃𝗲𝗿 𝘀𝗲𝗲.

Once the insulation and finish coat go on, the v***r barrier behind them is sealed in for the life of the wall. You do not get a second chance to pick it without opening the wall back up.

So it is worth knowing what that layer does and why the right one keeps your home dry for decades.

🔎 𝗪𝗵𝗮𝘁 𝗮 𝗩𝗮𝗽𝗼𝗿 𝗕𝗮𝗿𝗿𝗶𝗲𝗿 𝗔𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗗𝗼𝗲𝘀

Moisture moves in two directions. Rain and humidity push in from outside. Warm, damp air from inside your home pushes out, especially in winter. 𝗔 𝘃𝗮𝗽𝗼𝗿 𝗯𝗮𝗿𝗿𝗶𝗲𝗿 𝗵𝗮𝘀 𝘁𝗼 𝗵𝗮𝗻𝗱𝗹𝗲 𝗯𝗼𝘁𝗵 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝘁𝗿𝗮𝗽𝗽𝗶𝗻𝗴 𝘄𝗮𝘁𝗲𝗿 𝗶𝗻 𝘁𝗵𝗲 𝘄𝗮𝗹𝗹.

Block water from only one side and moisture gets stuck against the substrate. That is where rot, mold, and coating failure start.

✅ Stops liquid water from reaching the substrate
✅ Lets interior water v***r escape instead of trapping it
✅ Helps control condensation inside the wall assembly
✅ Protects insulation and sheathing from slow moisture damage

None of this shows up in a brochure photo. It is quiet work happening behind the finish, in every season, year after year. When it is done well, you never think about it. When it is skipped, you find out the hard way.

🧱 𝗪𝗵𝘆 𝘁𝗵𝗲 𝗖𝗵𝗼𝗶𝗰𝗲 𝗛𝗮𝗽𝗽𝗲𝗻𝘀 𝗙𝗶𝗿𝘀𝘁

The v***r barrier goes directly onto the substrate before the insulation and finish coat. 𝗧𝗵𝗮𝘁 𝗺𝗮𝗸𝗲𝘀 𝗶𝘁 𝗮 𝗱𝗲𝗰𝗶𝘀𝗶𝗼𝗻 𝘆𝗼𝘂 𝗹𝗼𝗰𝗸 𝗶𝗻 𝗮𝘁 𝘁𝗵𝗲 𝘀𝘁𝗮𝗿𝘁 𝗼𝗳 𝘁𝗵𝗲 𝗷𝗼𝗯, 𝗻𝗼𝘁 𝘀𝗼𝗺𝗲𝘁𝗵𝗶𝗻𝗴 𝘆𝗼𝘂 𝘀𝘄𝗮𝗽 𝗼𝘂𝘁 𝗹𝗮𝘁𝗲𝗿.

A self-adhering membrane like Sennershield VB is set early in the build and stays sealed behind everything else. Getting it right the first time is the entire point.

💧 𝗪𝗵𝗮𝘁 𝗦𝗲𝗻𝗻𝗲𝗿𝘀𝗵𝗶𝗲𝗹𝗱 𝗩𝗕 𝗔𝗱𝗱𝘀

Sennershield VB is a v***r barrier made for EIFS. It is highly waterproof, yet breathable enough to let trapped v***r work its way out. 𝗧𝗵𝗮𝘁 𝗯𝗮𝗹𝗮𝗻𝗰𝗲 𝗶𝘀 𝘄𝗵𝗮𝘁 𝗸𝗲𝗲𝗽𝘀 𝘁𝗵𝗲 𝘄𝗮𝗹𝗹 𝗱𝗿𝘆 𝗳𝗿𝗼𝗺 𝗯𝗼𝘁𝗵 𝘀𝗶𝗱𝗲𝘀.

✅ Self-adhering membrane applied right to the substrate
✅ Highly waterproof with strong breathability
✅ Resists tears and damage during installation
✅ Rated for a 30 year minimum life with manufacturer warranty
✅ Compatible with concrete, wood, and metal substrates

It also carries EIMA classification and meets ASTM and ICC-ES AC212 standards, so the wall assembly stays code compliant.

⚠️ In Central Indiana, freeze-thaw swings and damp springs put steady stress on exterior walls. A barrier that handles moisture from both sides is what keeps a small issue from turning into an expensive repair.

🏠 𝗦𝗶𝗴𝗻𝘀 𝗠𝗼𝗶𝘀𝘁𝘂𝗿𝗲 𝗠𝗮𝘆 𝗕𝗲 𝗚𝗲𝘁𝘁𝗶𝗻𝗴 𝗜𝗻

A v***r problem rarely announces itself from the outside. Staining below a window, soft spots in the finish, a musty smell indoors, or paint that keeps peeling in the same place can all point to water sitting where it should not. 𝗖𝗮𝘁𝗰𝗵𝗶𝗻𝗴 𝗶𝘁 𝗲𝗮𝗿𝗹𝘆 𝗶𝘀 𝘁𝗵𝗲 𝗱𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝗰𝗲 𝗯𝗲𝘁𝘄𝗲𝗲𝗻 𝗮 𝗾𝘂𝗶𝗰𝗸 𝗿𝗲𝗽𝗮𝗶𝗿 𝗮𝗻𝗱 𝗼𝗽𝗲𝗻𝗶𝗻𝗴 𝘁𝗵𝗲 𝘄𝗮𝗹𝗹 𝗯𝗮𝗰𝗸 𝘂𝗽.

There is an indoor benefit too. By keeping the wall dry and holding back outside contaminants, a breathable barrier makes it harder for mold to get a foothold, which supports cleaner air inside the home. For a family living there day to day, that matters as much as the look of the exterior.

📞 𝗧𝗮𝗹𝗸 𝘁𝗼 𝗜𝗻𝗱𝗶𝗮𝗻𝗮 𝗪𝗮𝗹𝗹 𝗦𝘆𝘀𝘁𝗲𝗺𝘀

Jeff Johnson has worked with EIFS since 1989 and has been contracting in Indiana for 26 years. Whether you are planning new EIFS or want to know what is behind your existing walls, you can get a straight answer.

𝘊𝘢𝘭𝘭 (𝟳𝟲𝟱) 𝟯𝟰𝟭-𝟲𝟬𝟮𝟬 𝘧𝘰𝘳 𝘢 𝘧𝘳𝘦𝘦 𝘌𝘐𝘍𝘚 𝘦𝘴𝘵𝘪𝘮𝘢𝘵𝘦, 𝘰𝘳 𝘳𝘦𝘢𝘥 𝘵ℎ𝘦 𝘧𝘶𝘭𝘭 𝘣𝘳𝘦𝘢𝘬𝘥𝘰𝘸𝘯 ℎ𝘦𝘳𝘦:

Unlock the benefits of Sennershield VB in EIFS: superior moisture control, enhanced durability, and improved energy efficiency for construction excellence

06/03/2026

𝗬𝗼𝘂𝗿 𝗘𝗜𝗙𝗦 𝘄𝗮𝗹𝗹 𝗶𝘀 𝗻𝗼𝘁 𝗴𝗼𝗶𝗻𝗴 𝘁𝗼 𝗳𝗮𝗶𝗹 𝗶𝗻 𝘁𝗵𝗲 𝗺𝗶𝗱𝗱𝗹𝗲.

A flat, open EIFS wall is the easy part. Insulation board, mesh, base coat, finish. On an open run, the materials are forgiving.

The trouble starts at the edges. Windows, doors, rooflines, penetrations, and the bottom of the wall near grade. That is where water finds a way in, and that is where almost every failure begins.

🧱 𝗪𝗵𝗮𝘁 𝗔𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗞𝗲𝗲𝗽𝘀 𝗪𝗮𝘁𝗲𝗿 𝗢𝘂𝘁

EIFS is a layered exterior wall system, not a coating you spray on. The finish you see from the curb is the last layer. The work that decides how long the wall lasts is behind it and around it.

𝘏𝘦𝘳𝘦 𝘪𝘴 𝘸ℎ𝘢𝘵 𝘢 𝘤𝘰𝘳𝘳𝘦𝘤𝘵 𝘪𝘯𝘴𝘵𝘢𝘭𝘭 𝘱𝘶𝘵𝘴 𝘪𝘯 𝘱𝘭𝘢𝘤𝘦:

✅ Sound, dry, flat sheathing prepped before any board goes up
✅ A drainage plane behind the insulation with weep tracks so water has a way back out
✅ Back-wrapped, flashed openings so window and door perimeters drain instead of soaking in
✅ Kickout and step flashing that send roof runoff into the gutter, not behind the finish
✅ Compatible sealants and a clean lower termination that keeps the wall out of soil and mulch

🛠️ 𝗧𝗵𝗲 𝗘𝗱𝗴𝗲𝘀 𝗪𝗲 𝗧𝗿𝗲𝗮𝘁 𝗮𝘀 𝘁𝗵𝗲 𝗠𝗮𝗶𝗻 𝗝𝗼𝗯

Every opening is a hole in the weather barrier. Around windows and doors, the EIFS gets back-wrapped and flashed so water that reaches the perimeter drains out instead of wicking into the substrate, and the joint to the frame uses a sealant that bonds to both surfaces.

Where a roof meets a wall, kickout and step flashing carry runoff into the gutter. A missing or undersized kickout is one of the most reliable ways to rot a wall from the inside out.

At grade, the bottom edge needs a clean termination and a drainage track so the system can dry and is not left sitting in soil or splashback. Hose bibs, vents, and light fixtures each get a sealed, sloped detail, not a smear of caulk that quits within a season.

🔎 𝗛𝗼𝘄 𝘁𝗼 𝗥𝗲𝗮𝗱 𝗮 𝗙𝗶𝗻𝗶𝘀𝗵𝗲𝗱 𝗜𝗻𝘀𝘁𝗮𝗹𝗹 𝗙𝗿𝗼𝗺 𝘁𝗵𝗲 𝗚𝗿𝗼𝘂𝗻𝗱

You do not need to open a wall to spot a rushed job. Walk the exterior and look at the transitions.

⚠️ A roof meeting the wall with no kickout flashing to push runoff into the gutter
⚠️ Accent bands, sills, or ledges built flat instead of pitched to shed water
⚠️ The bottom edge of the EIFS buried in soil or mulch with no drainage track
⚠️ Vents, hose bibs, and fixtures sealed with a smear of caulk instead of a real flashed detail

If you see these on new or recent work, ask questions before water does the asking for you.

🏠 𝗛𝗼𝗺𝗲𝘀, 𝗔𝗱𝗱𝗶𝘁𝗶𝗼𝗻𝘀, 𝗮𝗻𝗱 𝗖𝗼𝗺𝗺𝗲𝗿𝗰𝗶𝗮𝗹 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴𝘀

On a home, EIFS usually shows up on a new addition that needs to match the existing exterior, an upgrade over older siding or tired stucco, or a replacement after water damage. Matching texture and color on an addition is a finish-coat skill, and it reads as one surface when the same crew controls the base coat and mesh underneath.

Commercial work follows the same rules, scaled up. More openings, more rooflines, more penetrations, and coordination with roofing, glazing, and mechanical trades so the flashing laps the right way. Bigger walls move more, so expansion and control joints go where the building actually flexes.

Not every project starts with bare sheathing. When you are recladding an older exterior or replacing EIFS after water damage, an inspection before the work shows what is behind the finish: wet substrate, hidden rot, and the original detail that caused the trouble. Installing new EIFS over an unknown problem only buries it for a while.

𝗣𝗹𝗮𝗻 𝘁𝗵𝗲 𝘄𝗮𝗹𝗹 𝗿𝗶𝗴𝗵𝘁 𝘁𝗵𝗲 𝗳𝗶𝗿𝘀𝘁 𝘁𝗶𝗺𝗲.

Indiana Wall Systems has installed and repaired EIFS across Central Indiana for 26 years, with 160 years of combined field experience on the crew. We install on homes, additions, and commercial buildings, and we are certified to apply and inspect the products we use.

𝘗𝘭𝘢𝘯𝘯𝘪𝘯𝘨 𝘯𝘦𝘸 𝘌𝘐𝘍𝘚, 𝘢𝘯 𝘢𝘥𝘥𝘪𝘵𝘪𝘰𝘯, 𝘰𝘳 𝘢 𝘳𝘦𝘱𝘭𝘢𝘤𝘦𝘮𝘦𝘯𝘵? 𝘊𝘢𝘭𝘭 (𝟳𝟲𝟱) 𝟯𝟰𝟭-𝟲𝟬𝟮𝟬 𝘢𝘯𝘥 𝘵𝘦𝘭𝘭 𝘶𝘴 𝘸ℎ𝘢𝘵 𝘺𝘰𝘶 𝘢𝘳𝘦 𝘸𝘰𝘳𝘬𝘪𝘯𝘨 𝘰𝘯. 𝘠𝘰𝘶 𝘸𝘪𝘭𝘭 𝘨𝘦𝘵 𝘢 𝘴𝘵𝘳𝘢𝘪𝘨ℎ𝘵 𝘳𝘦𝘢𝘥 𝘰𝘯 𝘸ℎ𝘢𝘵 𝘵ℎ𝘦 𝘸𝘢𝘭𝘭 𝘯𝘦𝘦𝘥𝘴.

Professional EIFS installation in Central Indiana homes & commercial buildings, with substrate prep, drainage, flashing, and sealants. Call (765) 341-6020.

05/29/2026

𝗙𝗼𝘂𝗿 𝘁𝗿𝗮𝗱𝗲𝘀 𝘄𝗼𝗿𝗸 𝘁𝗵𝗲 𝘀𝗮𝗺𝗲 𝟭𝟮 𝗶𝗻𝗰𝗵𝗲𝘀 𝗼𝗳 𝘆𝗼𝘂𝗿 𝗯𝘂𝗶𝗹𝗱𝗶𝗻𝗴. 𝗪𝗵𝗲𝗻 𝗼𝗻𝗲 𝗺𝗶𝘀𝘀𝗲𝘀 𝘁𝗵𝗲 𝗵𝗮𝗻𝗱𝗼𝗳𝗳, 𝘁𝗵𝗲 𝗽𝗮𝗿𝗮𝗽𝗲𝘁 𝗹𝗲𝗮𝗸𝘀.

A leaking parapet usually is not a story about one bad product. It is a story about a handoff that did not line up.

Think about who touches the top of a commercial wall. The roofer turns the membrane up the parapet face. The EIFS applicator terminates the cladding above it. The sheet metal fabricator sets the coping cap. The caulking crew seals the joints. Four separate crews, four schedules, one narrow strip of building.

🧱 𝗪𝗵𝘆 𝗧𝗵𝗲 𝗢𝗿𝗱𝗲𝗿 𝗢𝗳 𝗪𝗼𝗿𝗸 𝗗𝗲𝗰𝗶𝗱𝗲𝘀 𝗪𝗵𝗲𝘁𝗵𝗲𝗿 𝗬𝗼𝘂 𝗟𝗲𝗮𝗸

Every layer on a parapet has to lap over the layer below it, the way shingles do. Water only sheds correctly when each piece overlaps the next one down. Get the order wrong and you get the opposite: a piece that tucks under instead of over, quietly funneling water behind the wall.

That is why the coping cap goes on last. It has to cover the EIFS termination, which covers the counterflashing, which covers the roof membrane turn-up. Anything installed out of turn breaks that path.

On a busy commercial job, schedules collide and crews get pushed out of sequence. The result shows up later as flashing that terminates under adjacent material, joints that cannot move, and overlaps that run the wrong way.

➜ 𝗧𝗵𝗲 𝗦𝗲𝗾𝘂𝗲𝗻𝗰𝗲 𝗔 𝗪𝗮𝘁𝗲𝗿𝘁𝗶𝗴𝗵𝘁 𝗣𝗮𝗿𝗮𝗽𝗲𝘁 𝗔𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗙𝗼𝗹𝗹𝗼𝘄𝘀

➜ Framing and blocking set, fastened to structure
➜ Sheathing and water-resistive barrier lapped to shed downward
➜ Roof membrane turned up the parapet face
➜ Termination bar and counterflashing installed over the membrane
➜ EIFS applied with proper backwrapped terminations
➜ Coping cap set last, overlapping every layer below it

🔎 𝗪𝗵𝗮𝘁 𝗔 𝗕𝗹𝗼𝘄𝗻 𝗛𝗮𝗻𝗱𝗼𝗳𝗳 𝗟𝗼𝗼𝗸𝘀 𝗟𝗶𝗸𝗲 𝗙𝗿𝗼𝗺 𝗧𝗵𝗲 𝗚𝗿𝗼𝘂𝗻𝗱

You will not see the sequencing error. You will see what it lets in. The signs that the trades did not line up at the roofline tend to be specific.

➜ Staining that runs down from a coping joint, not from a window
➜ Rust streaks below the coping where dissimilar metals meet
➜ Cracking along the parapet line where movement was not planned for
➜ Soft or spongy EIFS near the top of the wall

🛠️ 𝗪𝗵𝘆 𝗬𝗼𝘂 𝗡𝗲𝗲𝗱 𝗢𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗮𝗰𝘁𝗼𝗿 𝗪𝗵𝗼 𝗖𝗮𝗻 𝗥𝗲𝗮𝗱 𝗔𝗹𝗹 𝗙𝗼𝘂𝗿 𝗧𝗿𝗮𝗱𝗲𝘀

When a parapet leaks, three contractors often point at each other. The roofer says the wall failed. The EIFS contractor says the metal failed. The sheet metal shop says the sealant failed. Nobody owns the 12 inches where their work met.

𝗙𝗶𝗻𝗱𝗶𝗻𝗴 𝘁𝗵𝗲 𝗿𝗲𝗮𝗹 𝗹𝗲𝗮𝗸 𝗽𝗮𝘁𝗵 𝗺𝗲𝗮𝗻𝘀 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗵𝗲𝗿𝗲 𝗼𝗻𝗲 𝘁𝗿𝗮𝗱𝗲 𝗵𝗮𝗻𝗱𝗲𝗱 𝗼𝗳𝗳 𝘁𝗼 𝘁𝗵𝗲 𝗻𝗲𝘅𝘁 𝗮𝗻𝗱 𝘀𝗽𝗼𝘁𝘁𝗶𝗻𝗴 𝘄𝗵𝗶𝗰𝗵 𝗹𝗮𝗽 𝘄𝗲𝗻𝘁 𝘁𝗵𝗲 𝘄𝗿𝗼𝗻𝗴 𝘄𝗮𝘆. That is diagnosis, not patching. Patch one trade's piece without correcting the handoff and the leak comes back.

Indiana Wall Systems has repaired commercial EIFS parapets across central Indiana for over 26 years, on office buildings, strip malls, hotels, and multifamily properties throughout Indianapolis, Carmel, Fishers, Zionsville, and the surrounding communities. The team knows the manufacturer specifications and the IBC, FM, ASTM, and EIMA standards that govern every one of those handoffs.

Jeff Johnson has worked with EIFS since 1989 and has run Indiana Wall Systems since 2000. The company holds Master Builders, Senergy, and EIFS Installers certifications, carries an A+ BBB rating, and backs its work with a 10-year transferable warranty that includes inspections at 30 days, 1 year, 3 years, and 10 years.

𝗜𝗳 𝘆𝗼𝘂𝗿 𝗽𝗮𝗿𝗮𝗽𝗲𝘁 𝗶𝘀 𝗹𝗲𝗮𝗸𝗶𝗻𝗴 𝗮𝗻𝗱 𝘁𝗵𝗲 𝘁𝗿𝗮𝗱𝗲𝘀 𝗮𝗿𝗲 𝗯𝗹𝗮𝗺𝗶𝗻𝗴 𝗲𝗮𝗰𝗵 𝗼𝘁𝗵𝗲𝗿, 𝘆𝗼𝘂 𝗻𝗲𝗲𝗱 𝘀𝗼𝗺𝗲𝗼𝗻𝗲 𝘄𝗵𝗼 𝗰𝗮𝗻 𝘀𝗲𝗲 𝘁𝗵𝗲 𝘄𝗵𝗼𝗹𝗲 𝗮𝘀𝘀𝗲𝗺𝗯𝗹𝘆 𝗮𝘁 𝗼𝗻𝗰𝗲.

𝘊𝘢𝘭𝘭 (𝟳𝟲𝟱) 𝟯𝟰𝟭-𝟲𝟬𝟮𝟬 𝘵𝘰 ℎ𝘢𝘷𝘦 𝘺𝘰𝘶𝘳 𝘱𝘢𝘳𝘢𝘱𝘦𝘵 ℎ𝘢𝘯𝘥𝘰𝘧𝘧 𝘦𝘷𝘢𝘭𝘶𝘢𝘵𝘦𝘥, 𝘯𝘰𝘵 𝘫𝘶𝘴𝘵 𝘱𝘢𝘵𝘤ℎ𝘦𝘥.

https://centralindianastuccorepair.com/blog/eifs-parapet-walls-coping-details-that-prevent-leaks/

05/28/2026

𝗧𝗵𝗮𝘁 𝘀𝘁𝗮𝗶𝗻𝗲𝗱, 𝘀𝘁𝗿𝗲𝗮𝗸𝗲𝗱 𝗰𝗵𝗶𝗺𝗻𝗲𝘆 𝗶𝘀 𝗻𝗼𝘁 𝗷𝘂𝘀𝘁 𝗮 𝗰𝗼𝘀𝗺𝗲𝘁𝗶𝗰 𝗽𝗿𝗼𝗯𝗹𝗲𝗺.

The before-and-after photo above shows an EIFS chimney in Carmel that had been weathering in place for years. The dark streaks, washouts, and dirty finish were the visible part. The real concerns were hiding under the surface.

By the time a chimney looks like that, the finish coat has lost its bond, the sealant joints have given up, and moisture has had time to work its way into the wall.

🔎 𝗪𝗵𝗮𝘁 𝗪𝗲 𝗦𝗲𝗲 𝗼𝗻 𝗘𝗜𝗙𝗦 𝗖𝗵𝗶𝗺𝗻𝗲𝘆𝘀 𝗟𝗶𝗸𝗲 𝗧𝗵𝗶𝘀 𝗢𝗻𝗲

A neglected EIFS chimney almost always has more going on than streaks and stains. We see the same set of problems on chimneys across Central Indiana.

✅ Failed sealant at the cap, kick-outs, and roof-to-chimney transitions
✅ Soft or hollow spots where the base coat has debonded from the foam
✅ Cracking around the cap and shoulders where water sits the longest
✅ Old urethane caulk that has hardened, split, and pulled away
✅ Flat or under-pitched ledges that hold water instead of shedding it

Each of these details is a path for water to get behind the EIFS. Once water is behind the foam, it does not dry out the way the system was designed to.

🛠️ 𝗪𝗵𝗮𝘁 𝗮 𝗥𝗲𝗮𝗹 𝗘𝗜𝗙𝗦 𝗖𝗵𝗶𝗺𝗻𝗲𝘆 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝘀

A proper EIFS chimney repair is not a power wash and a coat of paint. The work has to address the layers underneath before anything cosmetic happens.

✅ Open up and inspect failed areas down to the substrate
✅ Reshape ledges to a 6 to 12 degree pitch so water runs off
✅ Rebuild base coats using BASF Master Builders Xtrastop or Dryvit Dryflex
✅ Add double mesh reinforcement at high-stress areas for hail resistance
✅ Replace old urethane caulk with 100% silicone EIFS sealants
✅ Finish-match the texture and color so the chimney blends with the rest of the home

That is what turns the streaked, tired chimney in the before photo into the clean, sealed assembly in the after photo. The visible improvement is real, but the protection underneath is the part that lasts.

🏠 𝗪𝗵𝘆 𝗧𝗵𝗶𝘀 𝗠𝗮𝘁𝘁𝗲𝗿𝘀 𝗙𝗼𝗿 𝗧𝗵𝗲 𝗥𝗲𝘀𝘁 𝗢𝗳 𝗧𝗵𝗲 𝗛𝗼𝘂𝘀𝗲

A chimney is one of the most exposed parts of an EIFS home. It catches wind, rain, sun, and snow on every face. When the chimney finish starts to break down, the same conditions are usually working on the rest of the wall, just less visibly.

If your chimney looks anything like the before photo, the smarter move is to have the chimney and surrounding walls looked at together. A targeted inspection tells you what is cosmetic, what is moisture-related, and what should be on the repair list before another freeze-thaw season.

Jeff Johnson has been working with EIFS since 1989 and has been contracting through Indiana Wall Systems since 2000. Twenty-six years of EIFS chimney work in Central Indiana shows up in the details: pitched ledges, properly bonded base coats, silicone EIFS sealants, and finishes that hold their look year after year.

💧 𝗪𝗵𝗮𝘁 𝗣𝗿𝗼𝗽𝗲𝗿𝘁𝘆 𝗢𝘄𝗻𝗲𝗿𝘀 𝗚𝗲𝘁 𝗪𝗿𝗼𝗻𝗴 𝗔𝗯𝗼𝘂𝘁 𝗖𝗵𝗶𝗺𝗻𝗲𝘆 𝗦𝘁𝗮𝗶𝗻𝗶𝗻𝗴

Most homeowners assume dark streaks on a chimney are just dirt. Sometimes they are. Often they are the trail of water that has been running through a failed sealant joint, off a flat ledge, or out of a cracked finish coat. The stain marks the path the water took on the outside. What the water did on the inside is a separate question.

Cleaning the streaks without fixing the cause sends the same water down the same path next month. The right move is to look at the chimney while the staining is visible, because the staining tells the inspector where to check first.

📞 𝗥𝗲𝗮𝗱𝘆 𝗙𝗼𝗿 𝗔 𝗖𝗹𝗼𝘀𝗲𝗿 𝗟𝗼𝗼𝗸 𝗔𝘁 𝗬𝗼𝘂𝗿 𝗖𝗵𝗶𝗺𝗻𝗲𝘆?

If the streaks, stains, or cracking on your chimney have you wondering what is underneath, the answer is worth getting before another season.

Call (𝟳𝟲𝟱) 𝟯𝟰𝟭-𝟲𝟬𝟮𝟬 to schedule an inspection and estimate.

𝘚𝘦𝘦 𝘤𝘰𝘮𝘱𝘭𝘦𝘵𝘦𝘥 𝘌𝘐𝘍𝘚 𝘤ℎ𝘪𝘮𝘯𝘦𝘺 𝘱𝘳𝘰𝘫𝘦𝘤𝘵𝘴 𝘢𝘯𝘥 𝘰𝘶𝘳 𝘧𝘶𝘭𝘭 𝘳𝘦𝘱𝘢𝘪𝘳 𝘴𝘤𝘰𝘱𝘦 at

Indiana Wall Systems specializes in EIFS installation, EIFS inspections, and EIFS and stucco repairs with 160+ years combined expertise, in our 26th year.

05/27/2026

𝗜𝗳 𝗬𝗼𝘂 𝗠𝗮𝗻𝗮𝗴𝗲 𝗔 𝗖𝗼𝗺𝗺𝗲𝗿𝗰𝗶𝗮𝗹 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗪𝗶𝘁𝗵 𝗘𝗜𝗙𝗦, 𝗧𝗵𝗲 𝗛𝗮𝗿𝗱 𝗣𝗮𝗿𝘁 𝗜𝘀 𝗡𝗼𝘁 𝗧𝗵𝗲 𝗥𝗲𝗽𝗮𝗶𝗿. 𝗜𝘁 𝗜𝘀 𝗘𝘃𝗲𝗿𝘆𝘁𝗵𝗶𝗻𝗴 𝗔𝗿𝗼𝘂𝗻𝗱 𝗧𝗵𝗲 𝗥𝗲𝗽𝗮𝗶𝗿

Tenants are still open. Customers are still walking in. The roofer might be on site next week. The HVAC contractor needs access to the same wall. And the property owner wants a real answer on scope before signing anything.

That is the part most contractors do not plan for, and it is where commercial EIFS projects go sideways.

𝗪𝗵𝘆 𝗖𝗼𝗺𝗺𝗲𝗿𝗰𝗶𝗮𝗹 𝗘𝗜𝗙𝗦 𝗜𝘀 𝗔 𝗗𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝘁 𝗝𝗼𝗯

A house with a failed sealant joint is a repair. A four-story office building with the same failed joint can mean wet sheathing across multiple bays, an interior tenant calling about a wall stain, and a repair bill several times larger than the original problem.

The wall areas are bigger, the joints and transitions are more numerous, and the exposure to weather and foot traffic is harder on the system. Office buildings, retail centers, hotels, churches, schools, and medical buildings all share that reality.

𝗪𝗵𝗮𝘁 𝗛𝗮𝘀 𝗧𝗼 𝗛𝗮𝗽𝗽𝗲𝗻 𝗕𝗲𝗳𝗼𝗿𝗲 𝗔𝗻𝘆 𝗥𝗲𝗽𝗮𝗶𝗿 𝗦𝗰𝗼𝗽𝗲 𝗜𝘀 𝗪𝗿𝗶𝘁𝘁𝗲𝗻

Walking the building is the first step, not the bid. Cracks at window corners, failed caulk at joints, staining below trim, soft spots near the base of the wall, and damage at entries each tell a different story about what is happening behind the finish.

➜ Sealant joints checked at every window, door, and expansion joint
➜ Window and door perimeters reviewed for flashing and detail failures
➜ Terminations at grade and at roof-wall intersections inspected for water entry
➜ Substrate condition confirmed in suspect areas before any patching begins
➜ Repair scope written from those findings, not from a guess off the parking lot

That is the step that separates a real scope from a number on a piece of paper.

𝗪𝗵𝗲𝗿𝗲 𝗖𝗼𝗼𝗿𝗱𝗶𝗻𝗮𝘁𝗶𝗼𝗻 𝗔𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗠𝗮𝘁𝘁𝗲𝗿𝘀

Lift and scaffold staging cannot block the front entrance during business hours. Tenants need notice when work is happening above their suite. Roof, window, or signage trades may be working in the same areas. Access planning, safety, and scheduling around an active building are part of every project decision, not an afterthought.

✅ Property manager kept in the loop on access and timing
✅ Work sequenced around tenant operations and other trades
✅ Materials and details matched to the existing EIFS, not a generic patch
✅ Texture and color matching handled as part of the repair, not after
✅ Records of what was done and where, for future maintenance planning

𝗪𝗵𝗮𝘁 𝗜𝗻𝗱𝗶𝗮𝗻𝗮 𝗪𝗮𝗹𝗹 𝗦𝘆𝘀𝘁𝗲𝗺𝘀 𝗕𝗿𝗶𝗻𝗴𝘀 𝗧𝗼 𝗖𝗼𝗺𝗺𝗲𝗿𝗰𝗶𝗮𝗹 𝗘𝗜𝗙𝗦 𝗪𝗼𝗿𝗸

Jeff Johnson's EIFS experience goes back to 1989, with Indiana contracting under Indiana Wall Systems since 2000. The work covers offices, retail centers, churches, schools, hotels, medical and professional buildings, and managed multi-unit properties across Indianapolis, Carmel, Fishers, Zionsville, Greenwood, Plainfield, Bloomington, Columbus, and into Louisville and Northern Kentucky when scope and travel make sense for the property owner.

Commercial scopes can include focused repair, sealant joint replacement programs, full EIFS inspection of the building envelope, EIFS restoration and recoating, and new installation on additions or re-clads. Most commercial projects combine two or more of these, and the right mix depends on what the inspection finds.

𝗜𝗳 𝗬𝗼𝘂 𝗔𝗿𝗲 𝗦𝗲𝗲𝗶𝗻𝗴 𝗖𝗿𝗮𝗰𝗸𝘀, 𝗦𝘁𝗮𝗶𝗻𝗶𝗻𝗴, 𝗙𝗮𝗶𝗹𝗲𝗱 𝗖𝗮𝘂𝗹𝗸, 𝗢𝗿 𝗔𝗴𝗶𝗻𝗴 𝗙𝗶𝗻𝗶𝘀𝗵

The right next step is a walk-through of the building before the damage spreads to the framing or sheathing. An assessment now is far less expensive than a full restoration scope two or three years from now.

𝘊𝘢𝘭𝘭 (𝟳𝟲𝟱) 𝟯𝟰𝟭-𝟲𝟬𝟮𝟬 𝘵𝘰 𝘴𝘤ℎ𝘦𝘥𝘶𝘭𝘦 𝘢 𝘤𝘰𝘮𝘮𝘦𝘳𝘤𝘪𝘢𝘭 𝘌𝘐𝘍𝘚 𝘦𝘷𝘢𝘭𝘶𝘢𝘵𝘪𝘰𝘯.

Commercial EIFS inspection, repair, installation, caulking, and restoration for Central Indiana buildings. Call Indiana Wall Systems for an estimate.

05/26/2026

🏠 𝗖𝗿𝗮𝗰𝗸𝘀, 𝗦𝘁𝗮𝗶𝗻𝘀, 𝗼𝗿 𝗦𝗼𝗳𝘁 𝗦𝗽𝗼𝘁𝘀 𝗼𝗻 𝗬𝗼𝘂𝗿 𝗘𝗜𝗙𝗦 𝗛𝗼𝗺𝗲? 𝗧𝗵𝗲 𝗠𝗮𝗿𝗸 𝗬𝗼𝘂 𝗦𝗲𝗲 𝗜𝘀 𝘁𝗵𝗲 𝗖𝗹𝘂𝗲, 𝗡𝗼𝘁 𝘁𝗵𝗲 𝗗𝗶𝗮𝗴𝗻𝗼𝘀𝗶𝘀.

When something visible shows up on an EIFS home, it is easy to assume the finish is the problem. Most of the time, the finish is fine. The wall is telling you something about what is happening behind it.

A crack at a window corner, a stain below a ledge, a soft area near a deck connection. These are not random. The location and the pattern are what point to the actual issue, and that is what should drive the repair scope.

🔎 𝗪𝗵𝗮𝘁 𝘁𝗵𝗲 𝗩𝗶𝘀𝗶𝗯𝗹𝗲 𝗦𝗶𝗴𝗻𝘀 𝗢𝗳𝘁𝗲𝗻 𝗠𝗲𝗮𝗻

✅ Cracks at window and door corners usually point to detail movement or failed sealant joints, not a coating problem
✅ Brown, dark, or rusty staining below trim often signals water tracking behind the finish from a failed detail above
✅ Soft spots that flex when pressed mean the substrate is wet and the system has been leaking long enough to do damage
✅ Hollow-sounding wall sections can mean delamination between the finish and the base coat
✅ Damage near decks, porches, or roof-wall joints almost always traces back to flashing or termination failures

🛠️ 𝗪𝗵𝘆 𝘁𝗵𝗲 𝗪𝗿𝗼𝗻𝗴 𝗥𝗲𝗽𝗮𝗶𝗿 𝗜𝘀 𝗪𝗼𝗿𝘀𝗲 𝗧𝗵𝗮𝗻 𝗡𝗼 𝗥𝗲𝗽𝗮𝗶𝗿

A patch with the wrong base coat will crack and pop loose within a season. A sealant that is not compatible with EIFS will pull away from the finish the first hot summer. Re-caulking a window without correcting the detail underneath sends the leak right back to the same spot the next spring.

That is the gap between painting an EIFS home and repairing one. The finish coat is the most visible layer, but the system has drainage paths, terminations, mesh, and material compatibility rules that have to be respected if the repair is going to hold.

🧱 𝗥𝗲𝘀𝗶𝗱𝗲𝗻𝘁𝗶𝗮𝗹 𝗘𝗜𝗙𝗦 𝗪𝗼𝗿𝗸 𝗜𝗻𝗱𝗶𝗮𝗻𝗮 𝗪𝗮𝗹𝗹 𝗦𝘆𝘀𝘁𝗲𝗺𝘀 𝗛𝗮𝗻𝗱𝗹𝗲𝘀

➜ Inspections that produce a clear scope before any repair is quoted
➜ Targeted repair of cracks, water damage, failed details, and impact damage
➜ Sealant joint replacement at windows, doors, and material transitions using EIFS-compatible products
➜ New EIFS on additions, garage conversions, and exterior remodels
➜ Restoration and recoating on older homes where the underlying system is still sound

The starting point depends on what the home is showing. Some homes need one targeted repair. Some need full sealant replacement. Some need an inspection before anyone should write an estimate. The point is to match the scope to the wall, not to the easiest sale.

🏠 𝗪𝗵𝗮𝘁 𝘁𝗼 𝗔𝘀𝗸 𝗕𝗲𝗳𝗼𝗿𝗲 𝗔𝗻𝘆𝗼𝗻𝗲 𝗧𝗼𝘂𝗰𝗵𝗲𝘀 𝘁𝗵𝗲 𝗪𝗮𝗹𝗹

If a contractor offers a quote without walking the home, that is the first signal something is off. A real residential EIFS estimate starts with a walkthrough of the visible problem areas, the details where EIFS typically fails, and any signs of moisture activity.

Ask whether the proposed sealant is compatible with EIFS finishes. Ask what the base coat material is. Ask whether the detail underneath the caulk is being corrected, or just re-caulked. Ask whether texture and color matching are part of the scope, and what realistic expectations look like on an aged finish. The answers tell you whether the repair will hold for a season or for a decade.

📞 𝗪𝗮𝗹𝗸 𝘁𝗵𝗲 𝗛𝗼𝗺𝗲 𝗙𝗶𝗿𝘀𝘁, 𝗤𝘂𝗼𝘁𝗲 𝗦𝗲𝗰𝗼𝗻𝗱

Jeff Johnson has worked with EIFS since 1989 and has been contracting in Central Indiana since 2000. That is 26 years of field experience on residential and commercial exterior wall systems. Indiana Wall Systems holds Master Builders, Senergy, and EIFS Installers certifications, carries an A+ BBB rating, and backs repair work with a 10-year transferable warranty and follow-up inspections at 30 days, 1 year, 3 years, and 10 years.

𝘊𝘢𝘭𝘭 (𝟳𝟲𝟱) 𝟯𝟰𝟭-𝟲𝟬𝟮𝟬 𝘵𝘰 𝘴𝘤ℎ𝘦𝘥𝘶𝘭𝘦 𝘢 𝘳𝘦𝘴𝘪𝘥𝘦𝘯𝘵𝘪𝘢𝘭 𝘌𝘐𝘍𝘚 𝘸𝘢𝘭𝘬𝘵ℎ𝘳𝘰𝘶𝘨ℎ.

𝘍𝘶𝘭𝘭 𝘴𝘦𝘳𝘷𝘪𝘤𝘦 𝘥𝘦𝘵𝘢𝘪𝘭𝘴:

Residential EIFS inspection, repair, installation, caulking, and restoration for Central Indiana homes. Call Indiana Wall Systems for an estimate.

05/22/2026

𝗠𝗲𝗺𝗼𝗿𝗶𝗮𝗹 𝗗𝗮𝘆 𝘄𝗲𝗲𝗸𝗲𝗻𝗱 𝗶𝘀 𝘁𝗵𝗲 𝗳𝗶𝗿𝘀𝘁 𝗹𝗼𝗻𝗴 𝘀𝘁𝗿𝗲𝘁𝗰𝗵 𝗼𝗳 𝘁𝗵𝗲 𝘆𝗲𝗮𝗿 𝗺𝗼𝘀𝘁 𝗽𝗲𝗼𝗽𝗹𝗲 𝘀𝗽𝗲𝗻𝗱 𝗹𝗼𝗼𝗸𝗶𝗻𝗴 𝗮𝘁 𝘁𝗵𝗲𝗶𝗿 𝗼𝘄𝗻 𝗵𝗼𝘂𝘀𝗲 𝗳𝗿𝗼𝗺 𝘁𝗵𝗲 𝗼𝘂𝘁𝘀𝗶𝗱𝗲.

The grill is out. Family is in the driveway. Friends are on the porch. You are walking the yard, setting up chairs, checking the deck, glancing up at the gables.

That is the exact right moment to actually look at your walls.

Most EIFS and stucco problems are visible from the ground if you know where to point your eyes. Five minutes around the perimeter this weekend can catch something a year before it becomes a serious repair.

🔎 𝗧𝗵𝗲 𝗙𝗶𝘃𝗲-𝗠𝗶𝗻𝘂𝘁𝗲 𝗪𝗮𝗹𝗹 𝗪𝗮𝗹𝗸

Step back from the house about 20 feet and start walking. Look at the wall, then look at the details. The wall itself is rarely the problem. The details are.

✅ Window and door perimeters: check for cracking, separated sealant, or dark lines along the frame
✅ Accent bands above windows and doors: look for staining underneath, which usually means the ledge is flat instead of pitched
✅ Lower terminations: check where the wall meets the foundation, mulch, soil, or hardscape
✅ Roof-to-wall transitions: look at every spot where EIFS meets a roof or porch roof
✅ Sealant joints at corners and material transitions: hardened, cracked, or missing sealant is a water path

🧱 𝗪𝗵𝘆 𝗧𝗵𝗲 𝗔𝗰𝗰𝗲𝗻𝘁 𝗕𝗮𝗻𝗱 𝗔𝗯𝗼𝘃𝗲 𝗬𝗼𝘂𝗿 𝗪𝗶𝗻𝗱𝗼𝘄𝘀 𝗠𝗮𝘁𝘁𝗲𝗿𝘀 𝗠𝗼𝗿𝗲 𝗧𝗵𝗮𝗻 𝗬𝗼𝘂 𝗧𝗵𝗶𝗻𝗸

If you see a dark vertical streak coming down from above a window, that is usually not a window leak. The accent band above the window was built flat instead of pitched 6 to 12 degrees. Water sits on it, soaks in, and shows up months or years later as what looks like an interior window leak.

The window was never the problem. The ledge above it was.

That is one of the most common hidden issues we find on EIFS homes built in Carmel, Fishers, Zionsville, Westclay, Bloomington, and the rest of Central Indiana. We rasp and reshape the ledge, bond and rebuild proper slope, install water-tight base coats like BASF/Master Builders Solutions Xtrastop or Dryvit Dryflex, add double mesh reinforcement for hail resistance, and replace old urethane caulk with 100% silicone EIFS sealants.

🏠 𝗪𝗵𝗮𝘁 𝗔𝗻 𝗘𝗜𝗙𝗦 𝗦𝘆𝘀𝘁𝗲𝗺 𝗜𝘀 𝗔𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗗𝗼𝗶𝗻𝗴 𝗙𝗼𝗿 𝗬𝗼𝘂𝗿 𝗛𝗼𝘂𝘀𝗲

Behind the finish you see is a six-layer assembly. Each layer has a job. Installed correctly, the system delivers up to 40% better energy efficiency than brick or wood, R-4 to R-5.6 per inch of insulation value, and a 50 to 100 year lifespan. Modern drainage-equipped systems prevent up to 99% of incidental moisture from reaching the wall assembly.

All of that depends on the details being done right. One flat ledge, one missed wrap at a door frame, one corner of failed sealant can compromise the entire system.

🛠️ 𝗪𝗵𝗼 𝗬𝗼𝘂 𝗔𝗿𝗲 𝗔𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗖𝗮𝗹𝗹𝗶𝗻𝗴

Jeff Johnson has worked with EIFS since 1989 and has been contracting through Indiana Wall Systems since 2000. That is 26 years contracting and even more time in the trade. Certifications include Master Builders, Senergy, and EIFS Installers. A+ BBB rating. 10-year transferable warranty with follow-up inspections at 30 days, 1 year, 3 years, and 10 years after project completion.

When the 10-year visit happens, most clients are surprised to see the original contractor back on site. That long-term follow-up is one of the reasons the repairs hold up year after year.

𝗦𝗲𝗿𝘃𝗶𝗻𝗴 𝗖𝗲𝗻𝘁𝗿𝗮𝗹 𝗜𝗻𝗱𝗶𝗮𝗻𝗮 𝗮𝗻𝗱 𝗡𝗼𝗿𝘁𝗵𝗲𝗿𝗻 𝗞𝗲𝗻𝘁𝘂𝗰𝗸𝘆

Indianapolis, Carmel, Fishers, Zionsville, Greenwood, Plainfield, Columbus, Bloomington, and the Louisville and Northern Kentucky metro.

If your weekend wall walk turned up something that does not look right, write it down before you forget. The earlier a detail gets caught, the smaller the repair scope tends to be.

𝘊𝘢𝘭𝘭 𝘵𝘰 𝘴𝘤𝘰𝘱𝘦 𝘢 𝘧𝘳𝘦𝘦 𝘦𝘴𝘵𝘪𝘮𝘢𝘵𝘦: (𝟳𝟲𝟱) 𝟯𝟰𝟭-𝟲𝟬𝟮𝟬
𝘚𝘦𝘦 𝘵ℎ𝘦 𝘧𝘶𝘭𝘭 𝘱𝘰𝘳𝘵𝘧𝘰𝘭𝘪𝘰:

Indiana Wall Systems specializes in EIFS installation, EIFS inspections, and EIFS and stucco repairs with 160+ years combined expertise, in our 26th year.