Evolve Interiors

Home
Australia
Kyneton, VIC
Evolve Interiors

The Evolve Group, Interiors & Stone - Our Consult, Design and Build Methodology Deliver Impeccable Results For Clients.

Evolve Interiors - Joinery & Cabinet Maker

03/09/2026

Every benchtop starts here: a slab selected and staged in our Kyneton yard, checked against the shop drawing before it reaches the cutting floor.

Whether it’s stone we hold directly or a specific slab sourced through a supplier partner, the selection is guided by our team, and once it lands in Kyneton, one team tracks it through cutting, polishing and install.

http://evolveinteriors.net.au/stone-supply2

20/08/2026

Every slab starts at the source. Evolve Stone works directly with quarries throughout Italy, Turkiye, South America, and Asia, not through layers of importers and agents.

That relationship means we see the block before it’s cut, we know exactly where each variety originates, and we can secure consistent supply for large-format and multi-slab projects.

For architects and designers specifying natural stone, that traceability is the difference between a material you can build a schedule around and one you’re hoping turns up. Thirty-plus varieties, sourced direct, fabricated and installed from our Kyneton facility.

https://www.evolveinteriors.net.au/stone-supply2

18/08/2026

Richmond. From workshop to install. American walnut veneer panels are cut on our CNC, edged, drilled and assembled in Kyneton, then delivered and installed by the same team that built them. 
The joinery runs full height through the living space, grain-matched across the doors and open shelving, set against a richly veined marble hearth. Same crew from design through to the final fix, so nothing gets lost in translation between workshop and site. 
Architecture by OLAVER  Build by Frame Works  Joinery by Evolve Interiors  Photography by Josh Robenstone  
http://evolveinteriors.net.au

17/08/2026

Brunswick. Stone and joinery on this kitchen were specified together, not coordinated back and forth between two separate trades. Adam Kane Architects worked directly with Evolve across both the Joinery and Stone packages, so material decisions were made once. The island is fabricated from Elba Blue, a soft grey-veined marble that keeps the material palette calm against the fluted joinery.

Evolve manufactured the joinery and fabricated the stone in the same workshop, off the same shop drawings and the same site measure.

For architects, that means fewer handoffs and fewer chances for something to be out of alignment by the time it reaches site.

Architecture by Adam Kane Architects  Build by GANDE CONSTRUCTIONS  Joinery by Evolve Interiors and stone by Evolve Stone  Photography by Timothy Kaye

http://evolveinteriors.net.au

16/08/2026

Fairfield. Full-height timber veneer cabinetry runs floor to ceiling through the kitchen, paired with a solid timber island bench and a fluted tile splashback that carries the same warmth as the exposed brick and raw concrete through the rest of the home.

Every piece starts as a drawing. The design is set up in Cabinet Vision, then that file drives our CNC machine to cut, edge and drill each panel to spec before it’s assembled, fitted with hardware, finished, and prepped for installation.

Joinery by Evolve Interiors, built and finished in-house at Kyneton.

http://evolveinteriors.net.au

Planit Cutting Edge Solutions

14/08/2026

No subcontractors between stone and joinery, it’s one team measuring, cutting, and installing.

Evolve is one of very few operators in Australia running stone fabrication and cabinetry under one roof. For builders and architects coordinating a build, that’s one point of accountability instead of separate trades on separate schedules.
Fabricated in-house at Kyneton.

https://www.evolveinteriors.net.au/stone-supply2

13/08/2026

Frame Works are one of our strongest building relationships, and Evolve Interiors has been fortunate enough to exclusively deliver their projects for the past 4 years. That kind of repeat trust between a builder and trade is what keeps a build moving smoothly, fewer unknowns, fewer things left to chance on site.

Barkly House, Brunswick. Tasmanian oak joinery, made in-house at our Kyneton workshop.

Designed by Ha
Built by Frame Works

http://evolveinteriors.net.au

31/07/2026

The Evolve Group Yard clearance is still on. We’ve got stone offcuts of every shape, size and colour that need a new home, priced to sell, nothing over $100 a piece.

Want something made up from it? We’ll price the manufacturing on top, just bring us your idea.
Pop into the showroom or the yard to see what’s there. Appointments Monday to Friday, give us a call to arrange a time.
1664 Kyneton-Metcalfe Rd, Kyneton.

https://www.evolveinteriors.net.au/

19/03/2025

A statement kitchen designed for seamless entertaining. Flowing effortlessly into the butler’s pantry, and creating a space that’s as practical as it is striking. A seamless blend of colours and materials, expertly curated through the collaboration of and , ensures every transition of this space feels natural and refined.

04/03/2025

Elonera House from a new perspective...
A striking contrast of colour, texture, and timeless design - where every angle tells a different story.

Interior Design- .doherty
Architecture-
Joinery-
Stone -
Landscape design -

Photography-
Photoshoot styling-

Address

1664 Kyneton Metcalf Road
Kyneton, VIC
3444

Telephone

+61354222571

Website

http://www.evolveinteriors.net.au/

Alerts

Be the first to know and let us send you an email when Evolve Interiors posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Evolve Interiors:

Want your business to be the top-listed Interior Service in Kyneton?