PVS Automotive

PVS Automotive Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from PVS Automotive, Sydney.

Since 2018, PVS Automotive has shipped more than 27,000 orders to 74 countries, building complete LandCruisers and the steering wheels, head units and interiors that go in them.

🦘100% Australian Owned & Operated | Sydney 🇦🇺

Some 70 Series builds spent three times more on mods than tyres.That's the trap with jumping to 35s or 37s, because ever...
03/09/2026

Some 70 Series builds spent three times more on mods than tyres.

That's the trap with jumping to 35s or 37s, because every size up rotates your speedo further from reality and quietly cuts your braking, and past the factory allowance you're into state engineering approval before it's even road legal.

Here's what each jump actually costs before you commit.

https://pvsautomotive.com.au/blogs/news/tyre-size-70-series-33s-35s-37s

03/09/2026

Metal grey 76 wearing a Urnieta bull bar with the winch tucked in low, and there's a real reason that front end reads so tight. Up top the roof rack, the rear ladder and the side steps all bolt to the factory points with nothing cut, so the whole thing hangs together instead of looking bolted-on. That carbon fibre bonnet is the quiet finish. Kit yours out at pvsautomotive.com.au.

The factory Jimny front end has nowhere to mount lights and no real protection, so the Vintage front bumper steps in wit...
02/09/2026

The factory Jimny front end has nowhere to mount lights and no real protection, so the Vintage front bumper steps in with slim single-piece steel, a low-set light bar and a winch tucked in behind, all sitting tight to the guards with nothing cut. Reads like it's earned its miles.

02/09/2026

A 76 leaves the factory with a slim front end, a tall thin windscreen and a Jimny sitting bare, none of it ready for real touring. The Urnieta gear sorts that: a full bull bar and winch on the 76, the SALADO front bumper and snorkel on the Jimny, plus roof racks, ladders and light bars that bolt to the factory points.

Take a look at pvsautomotive.com.au.

02/09/2026

The SALADO front bumper takes the hit up front, with the winch sitting fully recessed inside the housing, so there's nothing hanging out to snag on the line up a climb like this. Are you running recovery gear on your Jimny yet, or still hoping you won't need it?

More over at pvsautomotive.com.au.

02/09/2026

Vanilla White 76 with the carbon bonnet and matching carbon bull bar, and the contrast against the Vanilla White body is doing a lot of work here.

The bull bar carries a winch low behind it, side steps run the length underneath, and there's the roof rack up top with a rear window MOLLE panel on the side glass. All bolts to the factory points, nothing cut.

Kit yours out at pvsautomotive.com.au.

A 76 wearing a Urnieta bull bar with the twin round driving lights and mesh grille, snorkel up the guard, roof rack carr...
01/09/2026

A 76 wearing a Urnieta bull bar with the twin round driving lights and mesh grille, snorkel up the guard, roof rack carrying a pair of hard cases and the window vents on the rear glass, sitting in front of snow the way these things are meant to be seen.

Toyota left the platform good but bare, so we built the parts that were missing and nothing here was cut to make it fit. Fourth photo says the rest, wheels in the river, still going.

31/08/2026

Short wheelbase 71 in desert sand, side stripes and steel wheels sorted.

The bull bar and retro side profile just work.

Address

Sydney, NSW

Telephone

+61291846898

Website

Alerts

Be the first to know and let us send you an email when PVS Automotive posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share