Little Shop of Resin

13/10/2026

⚖️ MEASURE TWICE. MIX ONCE.

Resin isn't the place to guess!

Your resin and hardener need to be combined in their specified ratio so the chemical reaction can happen correctly.

For example:

🐚 Coral Cast = 2:1
🌊 Deep Reef = 3:1
🏝️ Shoreline Shield = 2:1

A small measuring mistake can create a BIG problem.

So:

✔️ Use accurate measuring equipment
✔️ Follow the correct ratio
✔️ Check whether your product specifies weight or volume
✔️ Mix thoroughly

Good resin art starts before the pour.

13/10/2026

🤔 WHICH RESIN WOULD YOU CHOOSE?

Let's put your resin knowledge to the test!

You need to make…

🌊 A deep river table
🏝️ A garage floor
✨ A countertop
🐚 A smaller casting project

Which one are you grabbing?

A. Coastal Coat
B. Coral Cast
C. Deep Reef
D. Shoreline Shield

Drop your answers below! 👇

12/10/2026

🚨 RESIN MYTH! 🚨

“If it's hard, it's fully cured.”

Not necessarily!

A resin piece can feel hard on the surface before it has reached its full cure.

That's why it's important to follow the recommended cure time for your particular resin.

For example, Deep Reef lists a 48-to-72-hour cure (set time), while Coral Cast and Shoreline Shield list approximately 24 hours at 25°C.
A full cure for use is 7 days.
Temperature and project conditions can affect curing.

So…

Don't rush the resin!

Your beautiful creation deserves the time it needs. 💕

11/10/2026

Results of our Resin art coaster and stand mould class on Saturday.

09/10/2026

🫧 BUBBLES… THE RESIN ARTIST'S ARCH NEMESIS! 😂

Seeing bubbles in your resin?

Try these habits:

✨ Mix slowly
✨ Avoid whipping air into your resin
✨ Scrape the sides and bottom of your mixing container
✨ Give bubbles time to rise when appropriate
✨ Keep your mould and workspace clean
✨ Follow the manufacturer's instructions for bubble removal

And remember:

🔥 Heat can help with bubbles — but too much heat can cause problems.

Always use heat carefully and appropriately for your particular resin and project.
Isopropyl Alcohol can be used to pop bubbles especially in silicone moulds.
Sometimes the best bubble-fighting tool isn't more heat…

It's better mixing technique.

Send a message to learn more

09/10/2026

✨ RESIN BY DAY… MAGIC BY NIGHT! ✨

Did you know we have glow-in-the-dark powders?

Our LSOR Glow in the Dark range comes in a variety of colours and creates a completely different look once the lights go out.

☀️ Daytime: beautiful colour
🌙 Night-time: GLOW!

Some of the range can glow for hours after being charged with light.

Imagine using them in:

🌌 Galaxy pieces
⭐ Decorations
🧜‍♀️ Fantasy art
🎃 Halloween projects
✨ Jewellery
🌙 Night-themed creations

Would you make something that glows?

YES or ABSOLUTELY? 😂

08/10/2026

Limited Stock! Come in store and check out our stock of Halloween silicone moulds.

07/10/2026

Come in and get 20% off Chameleon pigment powders, Today only!

07/10/2026

🦎 READY FOR A COLOUR-CHANGING EFFECT?

Chameleon pigments are something VERY special.

Depending on the viewing angle and light, they can reveal completely different colours.

Imagine:

💙 Blue → Green → Mauve
❤️ Red → Green → Gold
💜 Purple → Red → Green → Blue

That's the magic of colour-shifting pigment.

And yes…

We have a whole range of Chameleon powders at Little Shop of Resin! 🤩

They're perfect when you want your piece to look different every time someone walks past it.

Which colour combination would you choose?

05/10/2026

🎨 ONE PIGMENT. THREE LOOKS.

Here's your resin experiment for today!

Take ONE pigment colour and try:

LOOK 1 — Fully Mixed
Create a smooth, consistent colour.

LOOK 2 — Partially Mixed
Leave some variation for movement and depth.

LOOK 3 — Clear + Colour
Drop your colour into clear resin and watch it move.

Same pigment.

Completely different result!

This is why we LOVE resin art.

The materials are only half the story…

YOU create the magic. ✨

Which look is your favourite?

1️⃣ Fully mixed
2️⃣ Swirled
3️⃣ Floating colour

Send a message to learn more