Floors Exclusive

03/18/2026

https://www.facebook.com/share/v/182Uzypt3T/?mibextid=wwXIfr

02/24/2026

REFERENCE SPOTLIGHT 2/3

PRODUCT FLOOR: EAEBBKW – OAK Clear brushed white oil
PRODUCT WALL: BEECH Vulcano Fresco Duna milled natural oil
CUSTOMER:
ARCHITECT: DIANE BÖHRINGER Innenarchitektur
PHOTOS:

°

02/09/2026

02/09/2026

Two tone colour match.

Sanded the stairs down to raw. In this case, it was white oak.
The first step was to apply the Tover Belle Epoque water based stain. That is a fast dry stain and was dry in couple hours.
The next phase is to apply the finish. Tover L’Olio 100% is a mono coat type oil finish. It is a pigmented finish and in this case, I mixed the White and the Honey colours to best match the existing floor.
This process can all be done on the same day.
It order to finish a stair case that needs to keep open, we finish every other tread a spread the process over a couple days.

01/27/2026

After a couple floods, we needed to replace a couple small sections that we had put in a temporary fix. The most time-consuming part was the multiple stage treatment of the oak pieces to match the existing floor. No pigments were harmed in the making of those oak floor pieces.

01/27/2026

Parquet flood repair. This condo lobby floor was flooded by a sprinkler malfunction. After the water was cleaned up, a couple small sections of wood had buckled and split. We replaced it with a temporary epoxy fix. In the meantime, we began treatment on replacement wood pieces as this was not a pigmented finish. After the wood treatment was colour matched, the new wood sections were installed within the parquet floor.

01/19/2026

And matching the reactive stain treatment.

01/13/2026

The final touches on a beautiful floor restoration project. Sanding down and refinishing the main staircase. A little filler to hide the gap between the riser and tread.(it grown to as much as 1/4” in some spots)
As good as new. Ready for another work for another generation.

12/06/2025