RD WeldWorks

RD WeldWorks Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from RD WeldWorks, Arts & Crafts Store, Doncaster.

Have a look through what I’ve made for myself and customers alike and don’t hesitate to get in touch with me for quotes or with any queries you may have�
Cheers
Ross

Started to make myself a toolbox for taking out into production when I’m released onto the shop floor. Found that after ...
31/07/2022

Started to make myself a toolbox for taking out into production when I’m released onto the shop floor. Found that after making the rectangular parts of the frame that one was twisted so I used oxypropane to heat the joints up and clamp down to a flat surface.

More to follow this week with the addition of an internal shelf and hopefully some side panels and wheels.

Keep em peeled!👀😎

Rear seat conversion recently done in this VW Caddy Maxi 👌🏻 had to take bits of material off the panels to make them fit...
03/07/2022

Rear seat conversion recently done in this VW Caddy Maxi 👌🏻 had to take bits of material off the panels to make them fit nicer and then was able to weld them in😎 Thanks Mark 😁

17/06/2022

Had nicer jobs to do in this kind of heat 😂😮‍💨

Made this Spartan helmet as a “thank you” for the hard work from the guys at Art Fusion 13 last weekend. They always put...
10/06/2022

Made this Spartan helmet as a “thank you” for the hard work from the guys at Art Fusion 13 last weekend. They always put in amazing effort with all the designs and tattoos they produce so
I can’t recommend them enough 👌🏻

This one was made from Propshaft tube, a differential component, cam chain and round bar. The base was made from a differential cap from a lorry and a piece of twisted steel for the helmet to sit on😎

Really enjoyed making this one and it came out wicked 😎

30/05/2022

Hi guys!

Would just like to thank each and every single one of you who has viewed, liked and shared anything on here as this really means a lot to me 😊

Now, I’m wondering if anyone has any scrap steel they’re looking to get rid of? I can collect but bare in mind I only have a small car😅 anything from boxes of old rusty bolts to horse shoes etc basically anything basically made from steel 👌🏻

Cheers guys! 😁

Customer came to me as they wanted a contraption that will crush chicken bones. They sent diagrams over of the image the...
28/05/2022

Customer came to me as they wanted a contraption that will crush chicken bones. They sent diagrams over of the image they had in their head and I made it a reality 😎

Left a gap in the middle and the spikes at the side are different spaces so the customer is able to put 2 chicken legs on at once with adequate space 👌🏻

I can do projects that have a practical use as well as sculptural art so if you can think of anything that you might be able to make use of but can’t find anywhere please get in touch!😁

Found a couple of nice “aero” holes tonight 😂 just need to take the front half of the carpet and the dash out along with...
24/05/2022

Found a couple of nice “aero” holes tonight 😂 just need to take the front half of the carpet and the dash out along with the headliner before I can start prepping the metal (if any🫣) for welding 😁

Work has commenced tonight to strip my 1989 VW Polo - as you can see it needs loads of welding doing!😂 The pictures on t...
23/05/2022

Work has commenced tonight to strip my 1989 VW Polo - as you can see it needs loads of welding doing!😂

The pictures on this post don’t even show half of the welding that needs to be done but I will be posting progress for all to see 👌🏻

Job completed for another happy customer😁 got sent the photo for reference and was completed in an evening 😎 If you have...
16/05/2022

Job completed for another happy customer😁 got sent the photo for reference and was completed in an evening 😎

If you have seen any of these posts and like something you’ve seen please don’t hesitate to get in touch 😁

This is the start of a little wagon project for myself. Off cuts of 3mm plate, propshaft tubing and round bar along with...
16/05/2022

This is the start of a little wagon project for myself. Off cuts of 3mm plate, propshaft tubing and round bar along with a few nuts and bolts to secure the wheels on.

Work in progress but coming out great so far 😁

Wood burner I made for a friends garage out of an old air compressor tank. Really happy with how this one came out 😎👌🏻 s...
15/05/2022

Wood burner I made for a friends garage out of an old air compressor tank. Really happy with how this one came out 😎👌🏻 still needs paint, holes cutting underneath and one in the top for the flu but that will be sorted when the customer has a route for the flu to follow 😁

1 unicorn and 2 horses completed for various customers. All slightly different 👌🏻 Really enjoyed making these😁 Cheers gu...
14/05/2022

1 unicorn and 2 horses completed for various customers. All slightly different 👌🏻
Really enjoyed making these😁
Cheers guys 😊

Address

Doncaster
DN48BE

Website

Alerts

Be the first to know and let us send you an email when RD WeldWorks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category