Do It Your Self

Do It Your Self Simple DIY projects, craft ideas, and everyday inspiration.

09/09/2026

Grab your coffee and watch me save $80 on home decor before 9 AM ☕️🏺

Materials:

Any basic thrifted glass vase, baking soda, matte earth-tone acrylic paint, stiff bristle brush.

Steps:

Wash the vase thoroughly with warm, soapy water to remove oils and dust.

Mix the acrylic paint with baking soda until it forms a thick, frosting-like paste.

Brush the mix onto the vase using overlapping, heavy strokes to build maximum texture.

Allow it to set in a well-ventilated space until it hardens into a solid, matte, stone-like shell.
Time: 40 minutes + drying time

09/09/2026

Iridescent Crackle Glass Solar Candle

Materials:

1 Round clear glass hurricane vase or globe

200g Coarse clear crushed recycled glass granules

50g Iridescent rainbow mica flakes

Marine-grade outdoor clear acrylic gel medium

Soft silicone application sponge

Step by Step:

Wipe down your glass hurricane vase with rubbing alcohol to clear all surface oils.

Coat the outer surface of the glass with a thick, even layer of outdoor clear acrylic gel medium using a sponge.

Mix your crushed glass granules and iridescent mica flakes together in a shallow tray.

Roll the wet, coated glass globe firmly through the glass mixture, pressing down gently to embed the fragments.

Fill in any small gaps by hand-pressing extra glass granules into the wet gel.

Let the vase dry flat for 12 hours until the gel turns completely crystal clear and rock-hard.

Note: Standard craft craft glue will fail under direct sunlight and moisture. Always use marine-grade or outdoor-rated acrylic gel medium to ensure waterproof durability.

Time: 12 Hours (includes drying)

09/09/2026

The most satisfying 45 seconds of your day 🔊 Slathering paint paste onto cheap glass ✨

Materials:

Any outdated thrifted vase or vessel, baking soda, soft taupe or sage matte paint, flat stiff brush.

Steps:

Wipe down the glass object completely to remove dust and fingerprints.

Mix baking soda into your paint until it reaches a thick, frosting-like consistency.

Layer the paste onto the vessel with slow, intentional strokes to build tactile texture.

Allow to dry undisturbed until the surface turns into a smooth-touch matte shell.

Time: 45 minutes + drying time

09/09/2026

Hydro-Foam Concrete Ribbed Planter

Materials:

300g White gypsum casting concrete

30ml Liquid acrylic polymer additive

1 Flexible silicone ribbed planter mold

10ml Dark charcoal liquid pigment

Matte stone sealer & soft sponge

Step by Step:

Combine your white gypsum concrete powder with water and liquid acrylic polymer in a 3:1 ratio until fully smooth.

Add 5–8 drops of dark charcoal liquid pigment into the batch and swirl twice with a stick to create a marbled effect.

Pour the liquid steadily into your ribbed silicone mold, filling it to the top rim.

Vigorously tap and vibrate the sides of the mold for 30 seconds to force trapped air bubbles to the top surface.

Allow the mix to cure for 40 minutes until warm, then carefully peel away the flexible silicone mold.

Let it air-dry completely for 2 hours before applying a coat of matte stone sealer.

Note: Do not let the concrete cure in the silicone mold for longer than an hour. Gypsum concrete expands slightly as it sets, making it difficult to unmold if left overnight.

Time: 1 Hour

09/09/2026

Textured Sandstone Arch Bookends

Materials:

2 Wooden L-bracket bookend blanks

400g Pre-mixed heavy joint compound or sandstone plaster

100g Fine beach sand

1 Arch-pattern plastic texturing comb

Matte beige acrylic craft paint

Step by Step:

Mix your fine beach sand directly into the pre-mixed joint compound until thoroughly incorporated.

Apply a thick 1/2-inch layer of the sandy plaster onto the front face of your wooden bookend blanks.

Press your arch texturing comb firmly at the base of the bookend and drag it upward in a smooth arching motion.

Lift the comb cleanly at the end of the stroke to reveal sharp, clean architectural grooves.

Allow the heavy plaster to air-dry naturally for a full 24 hours until chalky and rock-hard.

Apply a coat of matte beige acrylic paint to seal the sand particles and enhance the shadow depth.

Note: Never use a hairdryer to speed up the drying process. Rapid heat causes thick plaster layers to shrink too fast, resulting in deep surface cracks.

Time: 24 Hours (includes drying)

09/09/2026

Guess how much this vase cost to make! (Hint: less than a cup of coffee) ☕️🏺

Materials:

Any plain thrifted glass vase, baking soda, earth-tone matte acrylic paint, coarse brush.

Steps:

Clean the surface thoroughly using rubbing alcohol for maximum paint adhesion.

Combine baking soda and paint in a small bowl until dense enough to hold soft peaks.

Slather the mixture generously over the vase using broad, downward sweeping strokes.

Leave to dry in a well-ventilated space until it cures into an authentic stone shell.

Time: 40 minutes + drying time

09/09/2026

Stop! Before you throw away those empty glass jars, try this 🛑🫙

Materials:

Any recycled glass food jar or vase, baking soda, matte neutral acrylic paint, stiff bristle brush.

Steps:

Wash the jar in warm, soapy water to strip away labels and grease.

Stir baking soda into your matte paint until a thick, cake-batter texture forms.

Brush the heavy mix across the glass in overlapping, horizontal strokes for natural pottery ridges.

Let it air-dry completely until it hardens into a chalky stone finish.

Time: 35 minutes + drying time

09/08/2026

Stop walking past the $2 glassware aisle at the thrift store! 🛑📦

The Formula: Thrifted Vase + Acrylic Paint + Baking Soda = High-End Textured Pottery.

Steps in 45 Mins:

Clean the glass thoroughly.

Mix paint and baking soda into a thick paste.

Apply with a stiff brush using thick, textured strokes.

Let dry to a stone-like matte finish.

The Payoff: Save $80+ on trendy home decor items by making your own organic centerpiece in less than an hour.

09/08/2026

What happens when you mix two basic craft supplies on a $2 thrift store find? Pure magic. 🛑🪴

Materials: Any clear glass vase, baking soda, matte earth-tone acrylic paint, stiff brush.

How-To:

Clean: Start with a spotless, oil-free glass surface.

The Secret Mix: Combine your acrylic paint with baking soda to create a thick, textured paste.

The Technique: Dab and brush the mixture heavily onto the glass, layering strokes to mimic real terracotta or stone.

Dry: Watch it transform as it dries into a solid, organic matte shell.

Why it works: 90% of shoppers pass right by these plain vases, but 45 minutes later, you've got a custom statement piece.

09/08/2026

Don’t spend $90 at a luxury boutique for that artisanal pottery look—make it yourself for pocket change! 🏺✨

Materials: Outdated thrift store glass vase, baking soda, matte earth-tone acrylic paint, stiff bristle brush.

Quick Steps:

Prep: Wipe down the glass completely to ensure the paint grips.

Mix: Stir baking soda into your acrylic paint until it forms a thick, frosting-like consistency.

Texture: Apply heavy, overlapping brushstrokes to build a rugged, faux-clay surface.

Set: Let it dry completely into a gorgeous, matte stone finish.

Pro Tip: Those $2 glass vases everyone overlooks? They are the ultimate canvas for a high-end textured pottery dupe. Total time is under an hour!

Address

Ohio City, OH

Website

Alerts

Be the first to know and let us send you an email when Do It Your Self posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category