08/14/2026
Before and after...
This beautiful early 1800's veneered hall table found its way to the shop for repairs and refinishing. There was a crack down the center of the top and veveer was loose and missing. The tilt mechanism for the base was not working properly as well. The finish was old, dirty and failing.
The top would not clamp together, so to stop any further separating, "bow tie" patches were installed on the bottom side. Veneer was repaired and replaced as needed, as were pieces of the lower apron and base.
VERY carefully removed the existing finish and lightly sanded as not to remove the patina.
A small addition of color to enhance the veneer and then a clear lacquer finish of 4 coats, sanded between coats.
Reassembled and " fine tuned". Then delivered to one of the nicest homes I've seen in quite some time. The client was very pleased, so am I.
What can I restore for YOU ?